Iglobalbuy 3 in 1 CT312 Multi Functional TIG / MMA / Air Plasma Cutter Welder Welding Machine With Pressure Gauge

Current range（A): TIG- 10-120; MMA- 10-120; CUT- 10-30. Rated output current（A): TIG- 120; MMA- 120; CUT- 30 Input current（A): TIG-13; MMA- 22; CUT- 21. No load（V): TIG-55; MMA- 55; CUT- 220 Work voltage（V): TIG-14; MMA- 24; CUT- 92. WARNING This equipment uses high voltage electrical current and produces extremely high temperatures. Misuse of this machine could result in fire, destruction of property, severe injury. SAFETY PRECAUTIONS Cutting may cause fire and explosion Keep children away Wear approved eye protection Wear approved gear, jackets, pants, boots, gloves etc. Do NOT wear wet or damp clothing Use with proper ventilation Do NOT use near combustibles or explosives Do not inhale fumes produced by this machine Only use in an area with approved ventilation Flying sparks may cause fire and burns Protect yourself, others, and the area from flying sparks Always have a fire extinguisher nearby Be aware that cutting on a ceiling or floor can cause fire on the opposite side Never cut closed containers such as drums or tanks, this may result in explosion Connect the ground cable as close to the work as possible Never cut a container with anything inside, this could result in explosion or fire Clean all material before cutting Do not cut near explosive dust or other vapors Never cut a pressurized pipe, cylinder or vessel. Follow all OSHA and NFAP requirements/regulations Inspect all connections and cables before and after each use. Do not use the equipment if damage is present. Insulate work clamp when not attached to the work Turn off equipment when not in use Electric shock may be fatal Never touch live electric parts Insulate yourself from the ground with proper protection Do NOT touch the torch's parts if its in contact with the work or ground Disconnect the machine from its input power supply before servicing, checking or cleaning.Input voltage（V):AC110-220V ± 10% 50/60(sing phase);Protection class:IP21
Input power capacitance（KVA):4.8;Efficiency(%):80;Duty cycle%:60;Insulation class:F
No-load loss（W):40;Power factor:0.93;Cut thickness（mm):1-8;Gas flow（L/min):2-5
Air pressure（mpa):0.4;2 Year Warranty;Item ship from US, estimate receiving time 3-7 days.
CT-312 3 in 1 Plasma Cutter/TIG/MMA Welder